Pump Model: SHR100D, Suction: 6-inch; Discharge: 4-inch. 

Material Construction: 

Impeller & Inner Liners: Natural Rubber R55;

Shaft & Shaft Sleeve: SUS316;

End Cover & Labyrinth: Zinc Plated. 

Engine Power: max. 60kW

1,Horizontal slurry pump accessories can be roughly divided into: slurry pump flow parts (namely, the part of the slurry pump contact liquid), slurry pump bracket part (also known as suspension), slurry pump base and slurry pump pump body pump cover, etc.

The slurry pump bracket part: The bracket body (suspension) is made of gray iron, belongs to the non-wearing parts, technical requirements are not high, and some parts of the general accessories, such as bearings, screws, bolts, oil plug, ring, oil mirror, belt, pulley, coupling, flange, washer, O-ring, mechanical seal, filler, nozzle and so on, generally do not need the slurry pump manufacturers own production.

Generally, the base of slurry pump can be welded and cut with iron plate according to the slurry pump with power motor, or cast according to the drawings.

Slurry pump pump body pump cover generally plays the role of protecting the slurry pump flow parts in the double pump shell slurry pump, which does not belong to the wearing parts.

So most of our customers and end users mouth mentioned slurry pump accessories in fact mainly refers to the slurry pump flow parts is usually called the four big parts: volute, impeller, front guard plate, rear guard plate, in addition to the slurry pump packing box and slurry pump auxiliary impeller is often replaced.

Slurry pump through the flow component is the core part of the slurry pump, is the slurry pump working operation and direct contact with the transmission medium of the accessories, so wear is the largest is the fastest replacement is the most frequent

Through the slurry pump model to introduce what are on behalf of the record, these are dry goods oh!

We take a certain specification of slurry pump as an example for analysis:

AH slurry pump model meaning: such as 4/3C-AH (R)

4: Inlet diameter 4 inches (100mm)

3: Outlet diameter 3 inches (75mm)

C: Bracket form

AH: Heavy duty slurry pump

R: Rubber material

ZJ slurry pump model significance: such as 100ZJ-I-A36

100: The outlet diameter is 100mm

ZJ: Slurry pump

I: single-stage slurry pump, second-stage pump marked II

A: Number of impeller blades. A is 5 tablets, B is 4 tablets, C is 3 tablets, and F is 6 tablets

36: impeller diameter 36cm

ZGB slurry pump model meaning: such as 200ZGB(P)

200: The outlet diameter is 200mm

Z: slurry pump

G: high lift slurry pump

B: Serial number

P: Multistage series (3-4) stages, (1-2) without marks

The biennial Turkey Mining Exhibition will be held in Fuar Izmir, Izmir, Turkey on September 13-16, 2023, and our company will bring a small and medium-sized slurry pump model to participate in the exhibition, so that customers who have needs can understand our products directly.

The exhibitor number of CNSME is shown in the picture below.

Find us at the following exhibitions:

1.   PDAC CANADA: MARCH 3-6, 2024;   TORONTO, CANADA

2.   MININGWORLD RUSSIA: APRIL 23-25, 2024;   MOSCOW, RUSSIA

3.   MINING & CONSTRUCTION VIETNAM: APRIL 24-26, 2024;   HANOI, VIETNAM

4.   EXPONOR CHILE: JUNE 3-6, 2024;   ANTOFAGASTA, CHILE

5.   MINEXPO LAS VEGAS: SEPTEMBER 24-26, 2024;   LAS VEGAS, USA