The gland assembly is located at the pump shaft sealing area. It works with the stuffing box to prevent slurry leakage from the pump shaft, providing a sealing effect. By adjusting the pressure, it helps extend the equipment’s lifespan and reduce slurry leakage.

Spare part shell ring for gravel pump is mainly used to connect and fix various parts of the pump to ensure sealing and stability. It plays a key role in the operation of gravel pumps, especially under high abrasion and vibration conditions.

Spare Parts for Vertical Slurry Pumps
Metal casing can be used for sp vertical slurry pump
Material: Metal
Casing is an important wear part of the vertical slurry pumps. It forms a slurry pump chamber where the slurry would flow through.

Bearing assembly is an important part of the slurry pump, also known as the rotor assembly, mainly used to connect the pump and the electric motor, transfer power and withstand the radial and axial force under the working conditions.

CNSME® slurry pump Latern Restrictor is generally made of stainless steel and installed in the stuffing box.

CNSME® Slurry Pump Expeller Ring is interchangeable with AH/HH/L/M slurry pumps expeller ring, The expeller ring is together work with expeller for slurry pumps. They can not only help seal the pump, but also reduce the centrifugal force.

The seal of the Expeller of the slurry pump is sealed by the hydrodynamic action, which belongs to the non-contact seal. The air or clean water generates pressure under the rotating action of the Expeller, and forms an air slurry or water slurry balance with the slurry at the outer edge of the Expeller, thus resisting the leakage of the liquid at the outlet of the main impeller.

Slurry Pump Frame Plate Liner Insert is a wear part of slurry pumps, It is also called for the slurry pump back liner based on locating position in the slurry pump structure, Frame plate liner insert forms a pump chamber with throat bush and volute liner where the slurry would flow through them, CNSME offers frame plate liner inserts are interchangeable with warman pump frame plate liner inserts with high chrome, natural rubber, polyurethane for different working condition.

Throatbush is one of the wet (end) parts of slurry pumps. It links cover plate /front casing of the pump outer casings and forms a pump chamber to work with impeller.

Impeller is the most important wet-end spare part of a slurry pump. Centrifugal pumps need impellers to produce the centrifugal force which transfers the slurries.

CNSME® H14110A05 Slurry Pump Volute Liner is an important wear part of 16/14TU-AH slurry pumps. It forms a slurry pump chamber with throat bush and frame plate liner insert where the slurry would flow through them.

Impeller is the most important wet-end spare part of a slurry pump. Centrifugal pumps need impellers to produce the centrifugal force which transfers the slurries.