6/4D-G Gravel pump is a compact and reliable small gravel pump designed for small and medium flow rate and high abrasion conditions.

Type G(orGH) gravel pumps are designed for continuously handling the most difficult high abrasive slurries which contain too big solids to be pumped by a common pump.

● Construction of this pump is of single casing connected by means of clamp bands and wide wet-passage.  The wet-end parts material is hard alloy has good wear resistance, corrosion resistance and high reliability.
● The bearing assembly is designed with high capacity bearings, and the bearing adopts grease lubrication and oil lubrication to adapt to different working conditions.
● The gap between the impeller and the backliner can be adjusted to ensure the efficient operation of the pump.
● The shaft seal adopts packing seal, expeller seal and mechanical seal to meet the requirements of different working conditions.
● The pump and drive machine can choose DC drive, CV drive, ZVZ and other drive methods.

With its high efficiency, abrasion resistance, large particle passing capacity and flexible sealing options, the 8/6E-G gravel pump is ideal for conveying highly abrasive media, and is particularly suitable for long term, stable operation under severe conditions.

Type G(or GH)gravel pumps are designed for continously handling the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump.

16/14TU-AH is a cantilever, horizontal centrifugal slurry pump, used for transporting highly abrasive and high density slurries in industries of metallurgy, mining, coal, power plants and construction.

14/12ST-AH slurry pump for single-stage single suction, cantilever, horizontal, centrifugal slurry pump, the pump belongs to the AH-type slurry pump, the introduction of foreign advanced technology manufactured from advanced design theory, excellent performance, can be used in multi-stage parallel tandem, withstand pressure, the pump belongs to the double-pump casing structure of the pump slurry pump, and its wet-end parts are made of high chromium wear-resistant metal and wear-resistant rubber.

CNSME Slurry pumps are designed with double casing, wet-end parts, and rotary parts. Wet-end parts includes volute, impeller, front and back liner. The rotary parts includes the bearing assembly, which are composed of bearing housing, shaft, bearings etc.

CNSME®8/6F-AH horizontal slurry pump is a high-efficiency, wear-resistant, corrosion-resistant single-stage single-suction, cantilever, horizontal centrifugal slurry pump, which widely used in mining, electric power, metallurgy, coal, chemical industry and other industries. It is suitable for pumping highly abrasive, high-concentration slurry or low-concentration high head slurry. It can be used in multiple stages in series under the pump's max. allowable working pressure range.

The wet-end parts of 4/3D-AH(R) slurry pump, such as impeller, volute liner and frame plate liner are made of high chrome alloy wear-resistant material, or wear-resistant rubber material. These materials have good wear resistance, which can effectively extent the service life of the pump, reduce replacement frequency and reduce maintenance costs.

AH slurry pumps are specially designed pumping equipment to transfer high density sludge that contains big solids, and are widely used in mining, construction, and petrochemical industries, with the advantages of abrasion resistance, large conveying capacity and not prone to clogging.

Centrifugal pumps are specially designed pumping equipment to transfer high density sludge that contains big solids, and are widely used in mining, construction, and petrochemical industries, with the advantages of abrasion resistance, large conveying capacity and not prone to clogging.