Plenty inventory of slurry pump parts. Not only for the below shown rubber liners, but also for metal pump parts such as impellers, volute liners, and so on.

What we can guarantee is a swift delivery to minimize the customers' down time.

Pump Model: SHR100D, Suction: 6-inch; Discharge: 4-inch.

Material Construction:

Impeller & Inner Liners: Natural Rubber R55;

Shaft & Shaft Sleeve: SUS316;

End Cover & Labyrinth: Zinc Plated.

Engine Power: max. 60kilowatt

Another batch of pumps went to their new site. This week, we loaded over 20 complete sets of heavy duty AH series slurry pumps along with elec. motors and accessories, and these pumps are going to be shipped to our customer in one of the Russian-speaking countries.

All these slurry pumps are expeller sealed. And in fact, expeller (ring) seal becomes our standard method of shaft sealing. Most customers ask for the reasons. That's because Expellers can be applied in virtually all slurries regardless of solid concentration. Slurry pumps manufactured by CNSME, are suited for expeller seals due to the abrasive nature of the slurry being pumped, and the typical lack of readily available, clean and pressurized gland seal water. Clean water can often be hard to come by in mining mills and mineral processing environments, and packing and sleeves may fail quickly when abrasive particles in the seal water or slurry itself enter the stuffing box. But this doesn't mean we will not offer other shaft sealing options. Gland/Packing seal and mechanical seal are also available for our slurry pumps, if the customers prefer to use these two sealing methods.

A slurry pump is a mechanical device used to transport liquids containing solid particles. It is widely used in mining, metallurgy, coal, electric power, chemical industry and other industries. The main function of a slurry pump is to transport slurry from one place to another. It is capable of transporting liquids containing high concentrations of solid particles, such as slag, coal cinder, ash, etc. The main components of the slurry pump include pump body, impeller, bearing, sealing device and so on.

With the continuous advancement of the industrialization process, the demand for slurry pumps continues to increase. Especially in mining, metallurgy and other industries, the demand for slurry pumps is increasing day by day. Therefore, the market prospect of the slurry pump industry is very broad.

With the continuous advancement of science and technology, the technology of slurry pumps is also developing. At present, the technology of slurry pump has become more and more mature, and its performance has been continuously improved. For example, some new slurry pumps adopt a high-efficiency and energy-saving design, which makes the pump more efficient and consumes less energy. At the same time, the application of some new materials also makes the service life of the slurry pump longer.

In general, the development prospect of the slurry pump industry is very broad. In the future, with the continuous development of science and technology, the technology of slurry pump will be more mature and its performance will be more superior. At the same time, with the continuous improvement of environmental protection awareness, the green environmental protection performance of slurry pumps will also receive more attention. Therefore, the slurry pump industry will usher in a broader development prospect.

A slurry pump is a pump used to transport high-concentration mixtures containing solid particles. According to different usage scenarios and needs, slurry pumps can be divided into many different classifications or types.

1. Horizontal centrifugal slurry pump: This is the most common type of slurry pump, mainly used to transport high-concentration slurry. The pump has a compact structure, smooth operation, and can withstand high pressure and large flow.

2. Vertical submerged slurry pump: This type of pump is usually installed in deep wells to pump groundwater and transport slurry. It has a smaller footprint and higher operating efficiency.

3. Heavy-duty slurry pump: This type of pump has a stronger structure and is suitable for transporting denser slurry, such as coal gangue and sludge.

4. Slurry pump: Similar to the slurry pump, the slurry pump is also a pump used to transport high-concentration mixtures containing solid particles. The difference is that mud pumps are usually used in drilling, prospecting and other processes in oil and gas industries.

In short, the slurry pump has a wide range of application fields and a variety of product categories, which can meet the needs of different users.