What should we pay attention to when the forth pump is running

Today we will understand the precautions of forth pump operation. CNSEM ® will give you a brief introduction. Let's have a look together.

When the forh pump is running, it is necessary to check the operation of the bearing assembly regularly. If the bearing is heated during open operation, it is necessary to stop the pump and wait for the pump shaft to cool down before running again. If the temperature of the bearing is still too high, and the temperature continues to rise, it is necessary to disassemble the bearing assembly of the pump shaft to check what the reason is.

General bearing heating is mostly caused by too much grease, or by magazines in grease. The amount of bearing grease should be appropriate, but also need to ensure cleanliness, and grease should be added regularly.

The performance of the forth pump deteriorates with the increase of the wear interval of the impeller and the protection plate, and the efficiency decreases. Therefore, the impeller should be adjusted upward in time, so as to maintain a certain interval so that the forth pump can maintain high efficiency operation.

When the forth pump wear cannot meet the needs of the system, it should be replaced in time.