A slurry pump base is usually located at the bottom of the pump or as part of a support structure fixed to the pump's frame or base. It is usually connected to key components such as the motor, pump casing, and bearings.
The slurry pump base is the foundation of the pump system, which directly affects the pump's stability, service life, and operating efficiency. Therefore, special attention must be paid to support, alignment, and safe installation details during installation.
Slurry Pump Base Installation Method and Details
Installation Location: The base should be installed on a flat, solid surface to ensure the entire pump remains level during operation If the base is unstable, it can affect the pump's performance and service life.
Fastening: During installation, the base must be bolted securely to the ground or support frame Bolts should be tightened to the specified torque to prevent loosening.
Alignment: The pump shaft and motor shaft must be precisely aligned to ensure smooth operation and avoid unnecessary wear or abnormal vibration.
Vibration Isolation: In high-vibration environments, rubber pads or other vibration isolation devices can be used to minimize the impact of vibrations on other pump components.
Inspection and Maintenance: After installation, the base and connected components should be regularly inspected to ensure they are not loose or damaged, preventing any adverse effects on pump operation.
Presupuesto
The slurry pump base is generally not damaged and is not a wear part.
Base frame | A | B | C | D | E | R | F | G | S | T |
Allowable matching power (Kw) | 7.5 | 15 | 30 | 60 | 120 | 300 | 260 | 600 | 560 | 1200 |
Base weight (Kg) | 17 | 24 | 45 | 77.5 | 154 | 228 | 555 | 1006 | 546 | 1156 |
Shaft seal water volume (I/s) | 0.15 | 0.25 | 0.35 | 0.55 | 0.70 | 0.70 | 0.70 | 1.20 | 1.20 | 1.60 |
Exhibición de productos
Slurry pump base part code
Frame Code | AH Slurry Pump | Materiales |
B003M | 1.5/1B-AH, 2/1.5B-AH | HT250, QT500 |
C003M | 3/2C-AH, 4/3C-AH | HT250, QT500 |
D003M | 4/3D-AH, 6/4D-AH | HT250, QT500 |
E003M | 6/4E-AH, 8/6E-AH | HT250, QT500 |
R003M | 8/6R-AH | HT250, QT500 |
FAM003M | 8/6F-AH, 10/8F-AH, 12/10F-AH | HT250, QT500 |
ST003M | 10/8ST-AH, 12/10ST-AH, 14/12ST-AH | HT250, QT500 |
TU003 | 16/14TU-AH, 18/16TU-AH, 20/18TU | HT250, QT500 |
Frame Code | HH Slurry Pump | Materiales |
C003M | 1.5/1C-HH | HT250, QT500 |
D003M | 3/2D-HH | HT250, QT500 |
E003M | 4/3E-HH | HT250, QT500 |
F003M | 6/4F-HH | HT250, QT500 |
Frame Code | M Slurry Pump | Materiales |
E003M | 10/8E-M | HT250, QT500 |
R003M | 10/8R-M | HT250, QT500 |
Frame Code | L Slurry Pump | Materiales |
A003M | 20A-L | HT250, QT500 |
B003M | 50B-L | HT250, QT500 |
C003M | 75C-L | HT250, QT500 |
D003M | 100D-L | HT250, QT500 |
E003M | 150E-L | HT250, QT500 |
S003M | 300S-L | HT250, QT500 |
Frame Code | G(H) Gravel Pump | Materiales |
D003M | 6/4D-G | HT250, QT500 |
E003M | 8/6E-G | HT250, QT500 |
F003M | 10/8F-G | HT250, QT500 |
S003M | 10/8S-G, 10/8S-GH | HT250, QT500 |
G003M | 12/10G-G, 14/12G-G, 12/10G-GH | HT250, QT500 |
TU003 | 16/14TU-GH | HT250, QT500 |
Notre équipe de pompe professionnelle de suspension est toujours à vos services.
Contact: MmeSerena Zhang
Tel:86 13333119820
Courriel: sales@cnsmepump.com
WhatsApp:86 13333119820
Ajouter: 260 # West Huaian Road, Shijiazhuang, Hebei, Chine. 050051.
Envoyez votre demande